Skip to main content

Internet of Things(IoT) Platform

Search This Blog

medical electronics

on November 12, 2017

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

I'm surrounded by lots of electronics today, unfortunately I'm hooked up to most of them. Plus various tubes.

I'm sure normal service will be resumed soon.

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Comments

Post a Comment

Popular Posts

18650 Li-Ion battery powered Wemos D1 with Wemos Battery Shield - DONE 30 days achieved

Wemos has developed a series of shields for the Wemos D1 : DHT Shield Battery Shield Matrix LED Shield Buzzer Shield Dual Base SHT30 Shield WS2812B RGB Shield ProtoBoard Shield 1-Button Shield Micro SD Card Shield Relay Shield DC Power Shield Tripler Base Motor Shield OLED Shield The good thing is that you can stack them on top of another. Let's take a look for now to the Battery Shield that is now on version 1.2.0 and it has a retired version 1.1.0 Get the schematics from here version 1.1.0 and 1.2.0 to see the differences. An immediate visual difference is the inductor on the V1.1.0 is much higher than the one on V1.2.0 but is not all. Battery Shield V1.1.0 Since I didn't found yet the version 1.2.0, I used the V1.1.0 from here . and the Wemos D1 mini from here . I've also added an BMP180 pressure and temperature sensor . Characteristics: Charging Voltage: max: 10V, recommend: 5V Charging Current: max: 1A Lithium Battery voltage: 3.3-4.2V Boost Power Supply: 5V(max: 1A

Arduino CNC shield control Stepper motor with DRV8825

CNC shield is quite useful for stepper motor driving. Here, I demonstrated how to use simple arduino code to drive stepper motor with DRV8825. First, just simply mount CNC shield onto Arduino Uno. Make sure the direction of the shield was right, where both the USB port and power supply wire was on your left hand site. The blue wire is my power supply which can be connect to 12-36V of power source. Next step you can mount the DRV8825 chip onto the CNC shield. Make sure the DRV8825 chip goes like this direction. If you put the chip in the wrong direction, you will probably damage it. By adjusting the jumber underneath the DRV8825 chip, motors can be driven with different kind of microstepping mode. I put three number here so it means that I set it into 1/32 step driving mode. Which is the most precise one of DRV8825. The motor can connect to the right site of the DRV8825. Plug in the usb to your computer and upload these coded which will generate steps moving in both direction sequenti

IoT connectivity comparison (GSM vs LoRa vs Sigfox vs NB-Iot)

With the growing options for connectivity, JP Meijers and I took a look at the comparison between each. The vast majority of the IoT we build for our clients relies on GSM, Bluetooth and Wifi, but the personal projects within Polymorph are focused on using technology such as LoRaWAN. Thus, we ensure we are always expanding and learning about ways to keep clients connected. The question of what connectivity to use is based completely on the use case of the IoT product you are creating and this is based on what your user needs. To start on your journey of what connectivity you require for your IoT product, please click the table below to see our comprehensive IoT connectivity comparison table Please do take a look at my other articles on IoT and contact us if you have any questions about what connectivity you should be using. My co-author and one of our senior engineers, JP Meijers, runs The Things Network events in Stellenbosch hosted by Polymorph. I hope to see you at our n

Powered by Blogger